HN-QB2533 is a high-hydroxyl acrylic dispersion designed for two-component waterborne polyurethane coati…
Waterborne 2K Metal Anti-Corrosion & High-Gloss Topcoat Solutions
Engineered for agricultural & construction machinery, steel structures and industrial metal protection—combining waterborne hydroxyl acrylic dispersions with water-dispersible polyisocyanate hardeners for mirror gloss, salt-spray durability and low-VOC application.
- Tailored OH gradient: 50%-solids HN-QB2518 (1.8% OH) and HN-QB2522 (2.2% OH) deliver long open time and cost efficiency; HN-QB2533 & HN-QB2033 (3.3% OH) maximize crosslink density, hardness and chemical resistance.
- Three matched polyisocyanate hardeners: N-1998S (silicone-modified for extended pot life and glass/metal adhesion), N-2099H (high gloss & fullness), and N-2199M (low viscosity, matte-capable).
- Complete 1K + 2K protection: Combine with HN-5101 or HN-5115 for fast-drying 1K anti-corrosion primers with flash-rust resistance.
Application Solutions
Recommended Grades for This Solution
Hydroxyl content on solids: 2.2%. HN-QB2522 is a high-solids, medium-hydroxyl styrene-acrylic dispersion…
Hydroxyl content on solids: 1.8%. HN-QB2518 is a high-solids, low-hydroxyl styrene-acrylic dispersion of…
Hydroxyl content on solids: 3.3%. HN-QB2033 is a high-hydroxyl styrene-acrylic dispersion offering high…
A 98% solids anionic silicone-modified water-dispersible polyisocyanate hardener with approx. 19.3% NCO,…
A 99% solids sulfonate-modified water-dispersible polyisocyanate hardener with approx. 20.0% NCO, good h…
A 99% solids polyether-modified water-dispersible polyisocyanate hardener with approx. 21.0% NCO, low vi…
This product is a styrene, acrylate and special functional monomer copolymerized polystyrene emulsion. T…
This product is a styrene, acrylate copolymer emulsion. The product has moderate hardness, good weather…
FAQ
Formulation & Application FAQ
What NCO:OH index is recommended for waterborne 2K polyurethane coatings?
An NCO:OH index of 1.20–1.30 is typical for industrial metal topcoats to compensate for minor NCO-water side reactions and maximize hardness, water resistance and salt-spray durability. Use our interactive 2K Stoichiometry Calculator on any hydroxyl or hardener grade page to compute exact weigh-out grams.
How do I choose between 50%-solids medium-OH grades (HN-QB2518 / HN-QB2522) and high-OH HN-QB2533?
HN-QB2518 (1.8% OH on solids) and HN-QB2522 (2.2% OH on solids) reduce hardener consumption while offering high film build and long open time. Choose HN-QB2533 (3.3% OH on solids) when higher chemical, alcohol and scratch resistance are required.
How can formulators minimize flash rust on bare steel substrates?
For acid-stable dispersions such as HN-QB2522 and HN-QB2518, neutralizing above pH 7.0 improves flash-rust resistance on carbon steel, while acidic pH favors adhesion on difficult non-ferrous metals. Pair with a compatible nitrite-free flash-rust inhibitor.
Can water-dispersible polyisocyanates be incorporated under low-shear or hand mixing?
Yes. Pre-diluting N-1998S or N-2099H to 70–80% solids in a suitable water-miscible co-solvent (e.g., PMA or DMM) significantly lowers viscosity and enables clean, fine dispersion even under manual mixing.